Oil Coolers & Fans
Improve & extend the life of your transmission
A transmission oil cooler is a key ingredient to improve and extend the life of your transmission. All of our transmission coolers are equipped with #6 fittings; and we offer coolers with and without a 500cfm reversible fan assembly for maximum cooling efficiency. Combine one of our transmission coolers with a deep aluminium pan and your transmission will enjoy a greatly extended life. A must with any Hughes stall speed converter.
| Part # |
Description
|
|
HP8238
|
H.D. Stacked plate Transmission Cooler 10"x 9"x 1-3/4" with #6 fittings |
|
HP8255
|
H.D. Stacked plate Transmission Cooler and Fan Assembly 12-3/4"x 9-3/8"x4-5/16" |
|
HP8231
|
Installation kit for HP8255 cooler. Incl: in-line thermostat, 10' high pressure hose, asst. fittings, adapters and clamps
|
|
HP8232
|
Installation kit for HP8238 cooler. Incl: , 10' high pressure hose, asst. fittings, adapters and clamps
|
|
HP8241
|
Braided Stainless Steel hose installation kit. Incl: 20' -6 braided SS hose, (2) straight -6 AN hose ends, (2) 45° -6 AN hose ends & (10) insulated line clamps.
requires transmission fittings (HP8245,46,47 or 48) |
|
HP8242
|
Braided Stainless Steel hose installation kit. Incl: 20' -6 braided SS hose, (2) straight -6 AN hose ends, (2) 90° -6 AN hose ends & (10) insulated line clamps.
requires transmission fittings (HP8245,46,47 or 48) |
|
HP8245
|
Transmission fitting 1/8" NPT to -6AN (fits stock case Powerglide and most Fords)
|
|
HP8246
|
Transmission fitting 1/4" NPT to -6AN (fits aftermarket Powerglide case)
|
|
HP8247
|
Transmission fitting 5/16" inverted flare (1/2-20) to -6AN Adapts inverted flare fitting to AN
|
|
HP8248
|
Transmission fitting ¼" NPS to -6AN (fits most GM transmissions) Replaces inverted flare case fitting |
Authorized Distributors
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
